|MMM Restoration - Removing Scratches and Melts in Plastic
David Benz it the perfect example of what it takes to be a true Major Matt Mason geek! This collector has spent hours perfecting simple (yet time-consuming) ways of restoring vintage MMM parts. This one is pretty easy, just takes some patience and a little time.
Removing Scratches and Melts in Plastic
In my opinion, the absolutely best way to get scratches and melts out of Matt Mason items is to sand them out.
First, start with a 400 to 600 grit sandpaper, use the grey/blue wet-dry stuff. Then move up to a 1200, and finish with a 1400 or 1600.
Now, what you'll have on a clear plastic piece is a nice, solid hazy finish. But don't worry! We'll bring back the shine.
You bring back the shine by using Novus plastic polish, available at motorycyle shops to polish helmet visors, windshields, etc. Start
with number three, then use number two, and finish off with number one.
You'll have a very, very shiny finished product! The only difference will be that, especially on the clear items, you'll have a multitude
of very, very tiny finish scratches, like you see on an automobile finish when the light hits it at the right angle.
In a way, this is good, because it allows you to distinguish a polished item from a mint item.
This process works perfectly for scratches, but one caveat when using it on melts. Remember, as you sand pieces of the toy away, the stuff
you sand away is gone forever. Many melts go very deep, and I actually have a few pieces in my collection that, if you look at them very
closely, you'll see they have some depressed areas where I sanded the melts out.
Finally, bear in mind that this takes a lot of time, so if you don't enjoy restoring things like I do, I'd just pony up for a better
quality item the next time it shows up on eBay.
-- David Benz
Oh: One more caveat. This only works on the HARD plastic items. The soft items, like the unitred top, the power limbs, the white base of
the powersuit, etc., are too soft for sanding and polishing. But the good news is, these softer plastic items don't seem to acquire melts
like the hard plastic items do!
As stated above, we make no guarantees of any of these cleaning and restoration techniques and provide a listing of what's been tried as a service only. Try these procedures at your own risk.
Finally, should anybody reading this have any similar information, additions or corrections, then we would very much appreciate hearing about them.
All Mattel images and captions are copyright Mattel and used without permission. All other content is copyright 1997-2001 John Eaton or the content's contributor. If there are any comments or objections, please contact John Eaton, by clicking here.